UC:IS:RailwayInfrastructureVisualisation

From railML 2 Wiki
Revision as of 15:12, 3 February 2020 by RailML Coord Documentation (talk | contribs) (1 revision imported)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
🗒️ This page is mirrored from page UC:IS:RailwayInfrastructureVisualisation in The railML® 3 wiki.
Railway Infrastructure Visualisation
(RAIV)
Subschema: Infrastructure
Stift.png (version(s) not yet specified)
For general information on use cases see UC:Use cases


Use case / Anwendungsfall

Railway Infrastructure Visualisation; Visualisierung von Schieneninfrastruktur

Description / Beschreibung

The typical railway planning process involves several iterations with different planning tools. The resulting changes to the planned infrastructure shall be fed back into a visualization software.

Data Flows and Interfaces / Datenflüsse und Schnittstellen

The infrastructure data to be modified contains railway topology, track and operational elements. These elements are exported with geo-referenced coordinates and can thus be visualized.

Interference with other railML® schemas / Interferenz mit anderen railML®-Schemen

  • none

Characterizing Data / Charakterisierung der Daten

This section serves to specify the required data regarding certain aspects.

How often do the data change (update)?

  • irregularly, depending on the planning iterations

How big are the data fragments to be exchanged (complexity)?

  • typically, single lines

Which views are represented by the data (focus)?

  • Geometry
  • Construction

Which specific IS data do you expect to receive/send (elements)?

  • Topology
    • <connections> <switch> (id, pos, absPos, model, length, type, trackContinueCourse)
    • <crossSections> (id, pos, absPos, dir, ocpRef)
    • <trackBegin> (id, pos, absPos)
    • <trackEnd> (id, pos, absPos)
    • <mileageChanges> (id, pos, absPos, absPosIn)
  • Track elements
    • <gradientChanges> (id, pos, absPos, Slope)
    • <speedChanges> (id, pos, absPos, dir, signalised, vMax)
    • <electrificationChanges> (id, pos, absPos, type, voltage, frequency)
    • <platformEdges> (id, pos, absPos, length, dir, height, side)
    • <radiusChanges> (id, pos, absPos, dir, radius, superelevation)
    • <geoMappings> (id, pos)
    • <geoCoord> (coord, extraHeight, epsgCode)
    • <bridges> (id, name, pos, length, dir)
    • <tunnels> (id, name, pos, length, dir, crossSection)
  • Operational infrastructure elements
    • <operationControlPoints> (id, name)
    • <propOperational> (operationalType)
    • <propService> (passenger)
    • <ocp> (id, name)