Dev:TrainProtectionSystems
|
The codelist TrainProtectionSystems comprises of train protection systems. It provides two container elements for track bound systems and train bound systems respectively. Your railML® download will usually contain the codelists in a directory codelists, next to documentation and schema. As As the codelists have shorter cycles than railML® versions have you might want to get the current list from https://svn.railml.org/railML2/trunk/codelists.
The code lists are intended to address certain frequently used entities with a single code, as to avoid repetitious work as well as ambiguity errors. Moreover, the separation of schema and codelists allows actualizing the codelists in very short cycles. The concept of codelists is explained here.
Specification
The list containes train protection systems. It provides two container elements for track bound systems and train bound systems respectively:
At track
- <trainProtectionSystemsAtTrack>: Container for train protection systems, installed "at the track"
- <trainProtectionSystem>: Single entries for each train protection system, installed "at track"
- code: A code that should be referred to from within an railML file, typically a short name for the train protection system in latin letters.
- <name>: Name of the system.
- <validFor>: If the code for the system differs between vehicle and track installation, put the mapping in this container element.
- <vehicleSystem>: Train protection system code of the according vehicle system.
- <trainProtectionSystem>: Single entries for each train protection system, installed "at track"
- Example entry
<trainProtectionSystem code="Crocodile"> <name/> <validFor> <vehicleSystem>Crocodile</vehicleSystem> <vehicleSystem>Memor</vehicleSystem> <vehicleSystem>Memor2</vehicleSystem> </validFor> </trainProtectionSystem>
On Vehicle
- <trainProtectionSystemsOnVehicle>: Container for train protection systems, installed "on the vehicle"
- <trainProtectionSystem>: Single entries for each train protection system, installed "on vehicle"
- code: A code, that should be referred to from within an railML file, typically a short name for the train protection system in latin letters.
- <name>: Name of the system.
- <validFor>: If the code for the system differs between vehicle and track installation, put the mapping in this container element.
- <trackSystem>: Train protection system code of the according track system.
- <trainProtectionSystem>: Single entries for each train protection system, installed "on vehicle"
- Example entry
<trainProtectionSystem code="CIR-ELKE2"> <name/> <validFor> <trackSystem>LZB</trackSystem> <trackSystem>CIR-ELKE</trackSystem> <trackSystem>CIR-ELKE2</trackSystem> </validFor> </trainProtectionSystem>
Affected Elements
Currently the codelist InfrastructureManagers.XML can be called from three elements:
|
Current entries
As of January 2018, the following Systems are listed:
At Track
railML® Code | Name | ValidFor | URL | Contact |
---|
On Vehicle
railML® Code | Name | ValidFor | URL | Contact |
---|
Are you missing an entry? The procedure to extend the list is explained here.