Template:InheritOperationMode: Difference between revisions
Jump to navigation
Jump to search
[checked revision] | [checked revision] |
(added clearanceManaging values, deleted missing info block) |
(Links in Vorlage geklopft) |
||
Line 8: | Line 8: | ||
:* {{Enum|time}} clearance is guaranteed through the amount of time a train leaves the block section completely. | :* {{Enum|time}} clearance is guaranteed through the amount of time a train leaves the block section completely. | ||
:* {{Enum|blocking}} means to guarantee a minimum distance between trains running in the same direction and to guarantee that two trains running in opposite directions are not in the same section of track simultaneously. The source of definition is IEC 60050:821-06-01. | :* {{Enum|blocking}} means to guarantee a minimum distance between trains running in the same direction and to guarantee that two trains running in opposite directions are not in the same section of track simultaneously. The source of definition is IEC 60050:821-06-01. | ||
:* {{Enum|LZB-blocking}} Continuous Train Control (LZB) transmits data continuously and bidirectionally. With LZB, a train can be automatically brought to a halt and can additionally be controlled. LZB consists of a line cable that is laid in the form of a loop in the track and an LZB radio block centre. Data telegrams are transmitted from the vehicle to the radio block centre and vice versa, via the line cable | :* {{Enum|LZB-blocking}} Continuous Train Control (LZB) transmits data continuously and bidirectionally. With LZB, a train can be automatically brought to a halt and can additionally be controlled. LZB consists of a line cable that is laid in the form of a loop in the track and an LZB radio block centre. Data telegrams are transmitted from the vehicle to the radio block centre and vice versa, via the line cable {{external|https://transport.ec.europa.eu/system/files/2018-03/nip-ccs-tsi-germany-en.pdf|ETCS migration planning in Germany}}. | ||
:* {{Enum|absBrakeDist}} wheel slide control systems. The most common of these operates rather like ABS (automatic braking systems) on road vehicles. The railway systems usually monitor the rotation of each axle and compare rotational speeds between pairs of axles. If a difference appears between a pair of axles during braking, the brake is released on those axles until the speeds equalise, when the brake is re-applied. All this occurs automatically. Modern systems also detect too rapid deceleration of an axle. Another form of slip/slide detection uses Doppler radar techniques. This measures the ground speed of the locomotive against the revolutions of each wheelset and uses the detection of a difference to regulate the control systems | :* {{Enum|absBrakeDist}} wheel slide control systems. The most common of these operates rather like ABS (automatic braking systems) on road vehicles. The railway systems usually monitor the rotation of each axle and compare rotational speeds between pairs of axles. If a difference appears between a pair of axles during braking, the brake is released on those axles until the speeds equalise, when the brake is re-applied. All this occurs automatically. Modern systems also detect too rapid deceleration of an axle. Another form of slip/slide detection uses Doppler radar techniques. This measures the ground speed of the locomotive against the revolutions of each wheelset and uses the detection of a difference to regulate the control systems {{external|1=http://www.integrail.info/openwiki/owbase/ow.asp?p=Slip%2FSlide%5FControl&a=print|2=Integrail Glossary}}. | ||
:* {{OtherEnum | :* {{OtherEnum | ||
|notes_en = | |notes_en = | ||
Line 33: | Line 33: | ||
{|border="1" | {|border="1" | ||
| | | | ||
{{InheritOperationMode}} | |||
|} | |} | ||
Line 62: | Line 49: | ||
{|border="1" | {|border="1" | ||
| | | | ||
{{InheritOperationMode | |||
|modeLegislative=English comment on modeLegislative | |||
|modeLegislative_de=German comment on modeLegislative | |||
|modeExecutive=English comment on modeExecutive | |||
|modeExecutive_de=German comment on modeExecutive | |||
|clearanceManaging=English comment on clearanceManaging | |||
|clearanceManaging_de=German comment on clearanceManaging | |||
}} | |||
|} | |} | ||
Latest revision as of 18:03, 4 December 2023
Usage
This template lists the attributes modeLegislative, modeExecutive and clearanceManaging. For clearanceManaging, the possible values are listed. All atributes can be commented both in English and German.
Arguments
The template has six optional arguments:
- modeLegislative: English comment on modeLegislative
- modeLegislative_de: German comment on modeLegislative
- modeExecutive: English comment on modeExecutive
- modeExecutive_de: German comment on modeExecutive
- clearanceManaging: English comment on clearanceManaging
- clearanceManaging_de: German comment on clearanceManaging
Dependencies
The template employs Template:Attr, Template:AddAnn, Template:Enum and Template:OtherEnum. No other templates depend on it.
Example
{{InheritOperationMode}}
delivers
|
{{InheritOperationMode |modeLegislative=English comment on modeLegislative |modeLegislative_de=German comment on modeLegislative |modeExecutive=English comment on modeExecutive |modeExecutive_de=German comment on modeExecutive |clearanceManaging=English comment on clearanceManaging |clearanceManaging_de=German comment on clearanceManaging }}
delivers
|
The template is employed by IS:operationMode and IS:operationModeChange.