TT:stopActivity

From railML 2 Wiki
Jump to navigation Jump to search

Sunrise.png This article contains information that is only valid for a future railML® version. The article refers to version 2.4, whereas the current railML® version is 2.5. 2.5


stopActivity
 


Scheme description / Schemenbeschreibung

Position of stopActivity in the XML-Tree / Position von stopActivity im XML-Baum

Multiplicity / Anzahl

[1..1]

Semantics / Bedeutung

The element describes the activity carried out at this stop. (introduced with version 2.4)

Attributes of stopActivity / Attribute von stopActivity

  • type: describes the activity carried out at this stop. Possible Values are:
  • collect: Couple vehicles / train parts - intended for non-self-propelling train parts. Please consider relation to formations (as far as used)
  • drop:Uncouple vehicles / train parts - intended for non-self-propelling train parts. Please consider relation to formations (as far as used)
  • split:Uncouple vehicles / train parts - intended for self-propelling train parts. Please consider relation to formations (as far as used)
  • join: Couple vehicles / train parts - intended for self-propelling train parts. Please consider relation to formations (as far as used)
  • shunting: Shunting movements are planned during stop (may also be used additionally to collect/drop/split/join/staple on demand)
  • crewChange: Stop to change engine or train crew
  • crewBreak: Stop for engine or train crew to pause
  • reverse: Stop to change driving direction of train. Consider relation to @formationReversed
  • runAround: Shunting of the engine to the other end of train (normally during change of driving direction). Normally combined with reverse
  • engineAttach: Receiving of pilot/pushing/double-heading engines - no train coupling
  • engineDetach: Dropping of pilot/pushing/double-heading engines - no train splitting
  • engineChange: Change of engine (no train coupling and sharing / splitting)
  • staple: Notes the necessity of staple track(s) during the stop time
  • occupation: Stop caused by occupation of lines, tracks, blocks incl. crossing without further specification
  • occupationBlock: Stop caused by occupation of route by another train running ahead
  • occupationCrossing: Stop caused by occupation of route by an oncoming train
  • occupationStation: Stop caused by occupation of station track(s)
  • powerSystemChange: Stop caused by a change of power supply (e.g. to change pantograph)
  • vehicleInspection: Stop for technical / technological vehicle inspections
  • gaugeChange: Stop caused by a change of gauge (e.g. to change or convert axles)
  • authorityCheck: Stop for purposes of passport or customs check or other authorities
  • photo:
  • catering: Supply or disposal of passengers or payload, e. g. catering
  • supplyOrDisposal: Supply of vehicles with operating supplies or materials or disposal of waste, including taking water for steam traction or steam heating
  • movementAuthority: Stop to receive the permission to proceed into the next route section
  • releaseLine: Stop to release the permission to proceed from the previous route section
  • shuntingPermission: Receive and/or release the permission to shunt inside ocp during stop time
  • misc: Specification possible by using @purpose
  • other:anything: Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed. Please, apply Dev:usingAny accordingly.
  • xs:anyAttribute: This provides an extension point for non-railML® attributes in a foreign namespace. How to use it?

Syntactic Constraints / Syntaktische Beschränkungen

Best practice & Examples / Empfohlene Anwendung & Beispiele

Missinginformation.png In this article there is information missing with respect to examples and/or best practice. Please help improving the railML® wiki by filling the gaps. Possibly, you will find further details on the discussion pageFerri Leberl (talk) 16:18, 25 October 2017 (CEST)

Notes / Anmerkungen

Not yet described. / Noch nicht beschrieben.

Open issues / Offene Punkte/Pendenzen

Template:TT:stopActivity/Tabelle