RS:vehicleBrake: Difference between revisions

From railML 2 Wiki
Jump to navigation Jump to search
[unchecked revision][unchecked revision]
m (Change of attributes)
(New templates used (Vorlage: InheritBrakes, Vorlage:InheritBrakesConstraints), markup corrected)
Line 1: Line 1:
{{elementDocu|
{{ElementDocu|
elementName = vehicleBrake
elementName = vehicleBrake


Line 5: Line 5:
The element {{RS:Tag|vehicleBrake}} contains the data for each brake system or brake setting result in a particular brake effort.
The element {{RS:Tag|vehicleBrake}} contains the data for each brake system or brake setting result in a particular brake effort.


{{deu|Das Element {{RS:Tag|vehicleBrake}} beinhaltet jeweils die Daten zu einer Fahrzeugbremse bzw. Bremsstellung, welche die Bremswirkung ergibt. Eine "Bremswirkung" wird
{{Deu|Das Element {{RS:Tag|vehicleBrake}} beinhaltet jeweils die Daten zu einer Fahrzeugbremse bzw. Bremsstellung, welche die Bremswirkung ergibt. Eine "Bremswirkung" wird}}
:* entweder durch eine Bremsmasse (regular/emergencyBrakeMass; unphysikalischer, historisch gewachsener Ersatzwert für mittlere Bremsverzögerung)
* {{Deu|entweder durch eine Bremsmasse {{Attr|regularBrakeMass}}/{{Attr|emergencyBrakeMass}} (unphysikalischer, historisch gewachsener Ersatzwert für mittlere Bremsverzögerung)}}
:* oder durch einen Bremshundertstelwert (autoBrakePerc; entspricht Bremsmasse, jedoch abhängig von aktueller Beladung = Masse des Fahrzeugs)
* {{Deu|oder durch einen Bremshundertstelwert {{Attr|autoBrakePercentage}} (entspricht Bremsmasse, jedoch abhängig von aktueller Beladung/Masse des Fahrzeugs)}}
:* oder durch eine mittlere Bremsverzögerung (max/meanDeceleration; eigentlich richtige physikalische Werte)
* {{Deu|oder durch eine mittlere Bremsverzögerung {{Attr|maxDeceleration}}/{{Attr|meanDeceleration}} (eigentlich richtige physikalische Werte)}}
repräsentiert.
{{Deu|repräsentiert.}}


Diese drei Werte-Gruppen sind also äquivalent / alternativ anzusehen; mindestens eine der drei Wertegruppen soll angegeben sein, es kann aber z. B. auch "Regular/EmergencyBrakeMass" und "Max/MeanDeceleration" angegeben sein. Letzteres ist wiederum die Vereinfachung zur Angabe von {{RS:Doc|mechanicalBrakeEffort|der Bremskraft}} über die Geschwindigkeit und des "brutto/nettoWeight" des {{RS:Doc|vehicle|Fahrzeugs}}.
{{Deu|Diese drei Werte-Gruppen sind also äquivalent / alternativ anzusehen; mindestens eine der drei Wertegruppen soll angegeben sein, es kann aber z. B. auch "{{Attr|regularBrakeMass}}/{{Attr|emergencyBrakeMass}}" und "{{Attr|maxDeceleration}}/{{Attr|meanDeceleration}}" angegeben sein. Letzteres ist wiederum die Vereinfachung zur Angabe von der Bremskraft ({{RS:Doc|mechanicalBrakeEffort}}) über die Geschwindigkeit und des "{{Attr|bruttoWeight}}/{{Attr|nettoWeight}}" des Fahrzeugs ({{RS:Doc|vehicle}}).}}


Ein Fahrzeug hat i. d. R. mehrere Bremswirkungen, weil
{{Deu|Ein Fahrzeug hat in der Regel mehrere Bremswirkungen, weil}}
:a) mehrere unabhängige Bremssysteme eingebaut sind und/oder
# {{Deu|mehrere unabhängige Bremssysteme eingebaut sind und/oder}}
:b) ein Bremssystem mehrere "Betriebssarten" ("Bremsstellungen") haben kann.
# {{Deu|ein Bremssystem mehrere "Betriebssarten" ("Bremsstellungen") haben kann.}}


Dabei wird es bei den meisten heutigen Eisenbahnfahrzeugen darauf hinauslaufen, dass mehrere Bremsstellungen aus dem Sammelsurium {G, P, R, P+Mg, R+Mg, P+E, R+E, P+H, R+H... usw.} angegeben sind. Es kann aber auch Wagen geben (und die gibt es wirklich!), die mehrere Bremssystembauformen haben, also Druckluftbremse und Saugluftbremse oder Druckluftbremse und Seilbremse oder so. Je nachdem, was das Triebfahrzeug hat, ist dann entweder die eine oder die andere Bremsbauform benutzt. Außerdem hat jedes Fahrzeug noch eine Handbremse / Feststellbremse, die hier als eigene Bremsbauform zu betrachten ist und daher als eigene Instanz von {{RS:Tag|VehicleBrake}} angegeben werden soll.}}
{{Deu|Dabei wird es bei den meisten heutigen Eisenbahnfahrzeugen darauf hinauslaufen, dass mehrere Bremsstellungen aus dem Sammelsurium [G, P, R, P+Mg, R+Mg, P+E, R+E, P+H, R+H... ] angegeben sind. Es kann aber auch Wagen geben (und die gibt es wirklich!), die mehrere Bremssystembauformen haben, also Druckluftbremse und Saugluftbremse oder Druckluftbremse und Seilbremse oder so. Je nachdem, was das Triebfahrzeug hat, ist dann entweder die eine oder die andere Bremsbauform benutzt. Außerdem hat jedes Fahrzeug noch eine Handbremse / Feststellbremse, die hier als eigene Bremsbauform zu betrachten ist und daher als eigene Instanz von {{RS:Tag|vehicleBrake}} angegeben werden soll.}}


|parent =
|parent =
Line 23: Line 23:


|childs =
|childs =
{{RS:Doc|auxiliaryBrakes}}
{{RS:Doc|auxiliaryBrakes|vehicleBrake}}


|inheritedAttributes =
|inheritedAttributes =
These attributes are inherited from [[tBasicBrakeType]].
{{InheritBrakes
|brakeType =
|airBrakeApplicationPosition =
|regularBrakeMass =
|emergencyBrakeMass =
|maxDeceleration =
|meanDeceleration =
}}


* {{attr|brakeType}}: This names the type of brake producing the brake effort. According to the way of controlling the brake application one of the following can be selected:
|ownAttributes =
::* '''none''' - no brake at all
* {{Attr|loadSwitch}}: This gives the optional information for vehicles fitted with a load switch for adjusting brake application. Possible values are:
::* '''compressedAir''' - (pneumatic) brake system using compressed air in the control pipe ({{deu|Druckluftbremse}})
:* {{Enum|full}}
::* '''vacuum''' - brake system using using vacuum in the control pipe ({{deu|Saugluftbremse}})
:* {{Enum|empty}}
::* '''handBrake''' - manually applied brake by turning a handle or a lever which operates a gear/rod assembly with brake shoes ({{deu|Handbremse}})
::* '''parkingBrake''' - mainly spring applied brake used to keep a parking vehicle stationary ({{deu|Feststellbremse}})
::* '''cableBrake''' - brake application controlled by a cable running along the train ({{deu|Heberleinbremse}})
::* '''other''' - brake applied by any other mechanism


* {{attr|airBrakeApplicationPosition}}: This is the setting for the air brake application defining the time span for activation. One of the following can be selected:
* {{Attr|autoBrakePercentage}}: This gives the automatically regulated brake percentages  depending on actual load of vehicle. The brake percentage is the ratio between the mass a vehicle can decelerate from a given speed to standstill within a given distance and the vehicle mass including payload multiplied with 100. <br/> {{Deu| [http://de.wikipedia.org/wiki/Bremshundertstel "Bremshundertstel"]}}
::* '''N/A''' - not applicable as brakeType is not ''compressedAir''
::* '''G''' - slow activation, typical for freight trains or Merchandises
::* '''P''' - fast activation, typical for passenger trains with speed up to 120 km/h
::* '''R''' - rapid activation, typical for passenger trains with higher speed


* {{attr|regularBrakeMass}}: This is the brake mass in metrical tons for normal brake operations of none-automatic brakes.
* {{Attr|maxAutoBrakeMass}}: This is the maximum brake mass of the automatic brake in metric tons.


* {{attr|emergencyBrakeMass}}: This is the brake mass in metrical tons for emergency brake operations of none-automatic brakes. It differs from regular brake mass depending on auxiliary brakes.
|constraints =
 
{{InheritBrakesConstraints}}
* {{attr|maxDeceleration}}: This is the alternative specification of maximum possible momentary deceleration in metres per square second. Typically this value is achieved near standstill.
 
* {{attr|meanDeceleration}}: This is the alternative specification of effective mean deceleration of a whole brake operation in metres per square second.


|ownAttributes =
* {{Attr|loadSwitch}} optional
* {{attr|loadSwitch}}: This gives the optional information for vehicles fitted with a load switch for adjusting brake application. Its position can be either ''full'' or ''empty''.


* {{attr|autoBrakePercentage}}: This gives the automatically regulated brake percentages ([http://de.wikipedia.org/wiki/Bremshundertstel Bremshundertstel]) depending on actual load of vehicle. The brake percentage is the ratio between the mass a vehicle can decelerate from a given speed to standstill within a given distance and the vehicle mass including payload multiplied with 100.
* {{Attr|autoBrakePercentage}} optional


* {{attr|maxAutoBrakeMass}}: This is the maximum brake mass of the automatic brake in metric tons.
* {{Attr|maxAutoBrakeMass}} optional


|constraints =
An unlimited number of {{RS:Tag|vehicleBrake}} can be used. However, there is at least one such element mandatory, if its parent {{RS:Tag|vehicleBrakes}} is used.
An unlimited number of {{RS:Tag|vehicleBrake}} can be used. However, there is at least one such element mandatory, if its parent {{RS:Doc|vehicleBrakes}} is used. The mandatory attributes are {{attr|brakeType}} and {{attr|airBrakeApplicationPosition}}.


|backHome = RS:elements
|backHome = RS:elements
}}
}}

Revision as of 14:23, 5 December 2011


vehicleBrake
 


Scheme description / Schemenbeschreibung

Position of vehicleBrake in the XML-Tree / Position von vehicleBrake im XML-Baum

Multiplicity / Anzahl

[1..1]

Semantics / Bedeutung

The element <vehicleBrake> contains the data for each brake system or brake setting result in a particular brake effort.

Das Element <vehicleBrake> beinhaltet jeweils die Daten zu einer Fahrzeugbremse bzw. Bremsstellung, welche die Bremswirkung ergibt. Eine "Bremswirkung" wird

  • entweder durch eine Bremsmasse regularBrakeMass/emergencyBrakeMass (unphysikalischer, historisch gewachsener Ersatzwert für mittlere Bremsverzögerung)
  • oder durch einen Bremshundertstelwert autoBrakePercentage (entspricht Bremsmasse, jedoch abhängig von aktueller Beladung/Masse des Fahrzeugs)
  • oder durch eine mittlere Bremsverzögerung maxDeceleration/meanDeceleration (eigentlich richtige physikalische Werte)

repräsentiert.

Diese drei Werte-Gruppen sind also äquivalent / alternativ anzusehen; mindestens eine der drei Wertegruppen soll angegeben sein, es kann aber z. B. auch "regularBrakeMass/emergencyBrakeMass" und "maxDeceleration/meanDeceleration" angegeben sein. Letzteres ist wiederum die Vereinfachung zur Angabe von der Bremskraft (mechanicalBrakeEffort) über die Geschwindigkeit und des "bruttoWeight/nettoWeight" des Fahrzeugs (vehicle).

Ein Fahrzeug hat in der Regel mehrere Bremswirkungen, weil

  1. mehrere unabhängige Bremssysteme eingebaut sind und/oder
  2. ein Bremssystem mehrere "Betriebssarten" ("Bremsstellungen") haben kann.

Dabei wird es bei den meisten heutigen Eisenbahnfahrzeugen darauf hinauslaufen, dass mehrere Bremsstellungen aus dem Sammelsurium [G, P, R, P+Mg, R+Mg, P+E, R+E, P+H, R+H... ] angegeben sind. Es kann aber auch Wagen geben (und die gibt es wirklich!), die mehrere Bremssystembauformen haben, also Druckluftbremse und Saugluftbremse oder Druckluftbremse und Seilbremse oder so. Je nachdem, was das Triebfahrzeug hat, ist dann entweder die eine oder die andere Bremsbauform benutzt. Außerdem hat jedes Fahrzeug noch eine Handbremse / Feststellbremse, die hier als eigene Bremsbauform zu betrachten ist und daher als eigene Instanz von <vehicleBrake> angegeben werden soll.

Attributes of vehicleBrake / Attribute von vehicleBrake

  • brakeType: This names the type of brake producing the brake effort. According to the way of controlling the brake application one of the following values should be selected:
  • none no brake at all
  • compressedAir (pneumatic) brake system using compressed air to press the brake shoes onto the wheels or brake discs.
    "Druckluftbremse"
  • vacuum brake system using vacuum in the control pipe. The brake shoes are pressed onto the wheels by means of athmospheric air pressure.
    "Saugluftbremse"
  • handBrake manually applied brake by turning a handle or a lever which operates a gear/rod assembly with brake shoes
    "Handbremse"
  • parkingBrake mainly spring applied brake used to keep a parking vehicle stationary
    "Feststellbremse"
  • cableBrake brake applied by a cable running along the train
    "Seilzugbremse", z. B. Bauart Heberlein
  • other:anything: Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed. Please, apply Dev:usingAny accordingly.
    brake applied by any other mechanism
  • airBrakeApplicationPosition: This is the setting for the air brake application defining the time span for activation. Possible values are:
  • N/A not applicable as brakeType is not compressedAir
  • G slow activation, typical for freight trains or Merchandises
  • P fast activation, typical for passenger trains with speed up to 120 km/h
  • R rapid activation, typical for passenger trains with higher speed
  • regularBrakeMass: This is the brake mass in metrical tons for normal brake operations of none-automatic brakes.
  • regularBrakePercentage (introduced with version 2.5): This is the brake percentage related to brake mass for normal brake operations of none-automatic brakes.
  • emergencyBrakeMass: This is the brake mass in metrical tons for emergency brake operations of none-automatic brakes. It differs from regular brake mass depending on auxiliary brakes.
  • emergencyBrakePercentage (introduced with version 2.5): This is the brake percentage related to brake mass for emergency brake operations, differs from regular brake percentage depending on auxiliary brakes.
  • maxDeceleration: This is the alternative specification of maximum possible momentary deceleration in metres per square second. Typically this value is achieved near standstill.
  • meanDeceleration: This is the alternative specification of effective mean deceleration of a whole brake operation in metres per square second.
  • loadSwitch: This gives the optional information for vehicles fitted with a load switch for adjusting brake application. Possible values are:
  • full
  • empty
  • autoBrakePercentage: This gives the automatically regulated brake percentages depending on actual load of vehicle. The brake percentage is the ratio between the mass a vehicle can decelerate from a given speed to standstill within a given distance and the vehicle mass including payload multiplied with 100.
    "Bremshundertstel"
  • maxAutoBrakeMass: This is the maximum brake mass of the automatic brake in metric tons.

Syntactic Constraints / Syntaktische Beschränkungen

  • regularBrakePercentage xs:integer, within the range of 6 and 225, brake percentage as value of braking performance in relation to vehicle weight, optional
  • emergencyBrakePercentage xs:integer, within the range of 6 and 225, brake percentage as value of braking performance in relation to vehicle weight, optional
  • maxDeceleration: xs:decimal, 3 fraction digits, acceleration value measured in m/s², optional
  • meanDeceleration: xs:decimal, 3 fraction digits, acceleration value measured in m/s², optional
  • loadSwitch optional
  • autoBrakePercentage optional
  • maxAutoBrakeMass optional

An unlimited number of <vehicleBrake> can be used. However, there is at least one such element mandatory, if its parent <vehicleBrakes> is used.

Best practice & Examples / Empfohlene Anwendung & Beispiele

Not yet described. / Noch nicht beschrieben.

Notes / Anmerkungen

Not yet described. / Noch nicht beschrieben.

Open issues / Offene Punkte/Pendenzen

Not yet described. / Noch nicht beschrieben.