RS:gangway

From railML 2 Wiki
Revision as of 11:34, 9 December 2011 by RailML Superseded Users (talk | contribs) (Type constraints added)
Jump to navigation Jump to search


gangway
 


Scheme description / Schemenbeschreibung

Position of gangway in the XML-Tree / Position von gangway im XML-Baum

  • Parent: <passenger>
  • Children: Not yet described. / Noch nicht beschrieben.

Multiplicity / Anzahl

[1..1]

Semantics / Bedeutung

The element <gangway> contains all data for gangways alowing the interchange to neighbouring vehicles.

Das Element <gangway> beinhaltet alle Daten für die Beschreibung von Wagenübergängen, die von Personen während der Fahrt genutzt werden können.

Attributes of gangway / Attribute von gangway

  • frontEnd: This is the flag, whether there is a gangway on the front end of the vehicle.
  • rearEnd: This is the flag, whether there is a gangway on the rear end of the vehicle.
  • position: This specifies the position of the gangway, assuming the same position for both ends. Possible values are:
  • standardUIC position according UIC standard
  • upperDeck position for interchange at upper deck level
  • lowerDeck position for interchange at lower deck level
  • other:anything: Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed. Please, apply Dev:usingAny accordingly.
    any other position
  • designType (introduced with version 2.0): This is a selection of possible design types. It shall be same type for both sides or only one gangway at all. Possible values are:
  • standardUIC561 The standard UIC gangway of the well-known rubber type.
  • special A special design type of gangway.
  • nonPublic A gangway which can be used by staff but not the public.
  • sigI Design type I of a gangway from SIG.
  • sigII Design type II of a gangway from SIG.
  • unknown Unspecified design type of gangway.
  • other:anything: Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed. Please, apply Dev:usingAny accordingly.
    any other design type of gangway
  • floorLevel (introduced with version 2.0): The height of the gangway's floor above top of rail in metres.
  • gangwayHeight (introduced with version 2.0): The (inner) height of the gangway for passenger use in metres.
  • gangwayWidth (introduced with version 2.0): The (inner) width of gangway for passenger use in metres. If the width differs over height the smallest value shall be given here.

Syntactic Constraints / Syntaktische Beschränkungen

  • position optional
  • designType mandatory
  • floorLevel optional
  • gangwayHeight optional
  • gangwayWidth optional

The element gangway can be used several times for any vehicle.

Best practice & Examples / Empfohlene Anwendung & Beispiele

Not yet described. / Noch nicht beschrieben.

Notes / Anmerkungen

The description of gangway position can be very roughly by attribute position or with detailed dimensions. In latter case the attribute position shall not be used.

Open issues / Offene Punkte/Pendenzen

Not yet described. / Noch nicht beschrieben.